Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Vertical (0U) |
| Height | 1.5U body section (45 mm) |
| Mounting length | 1358 mm |
| Outlet configuration | 8× NEMA 5-15 + 8× IEC C13 / C19 |
| Outlet rating | C13: 10 A; C19: 16 A; NEMA 5-15: 15 A |
| Input connection | Hard-wired terminal block, 5-wire |
| Input voltage | 110–250 V AC, 50/60 Hz |
| Max input current | 63 A |
| Rated power | Up to 15 kW at 250 V |
| Phase | Single-phase |
| Main breaker | 1-pole hydraulic-magnetic breaker, 63 A |
| Surge protection | None |
| Metering | LCD, current / voltage / power / energy |
| Monitoring interface | TCP/IP, SNMP v1/v2/v3, Modbus TCP, RS485 |
| Outlet switching | Per-outlet remote on/off and metering |
| Cable entry | Top or bottom |
| Housing | Cold-rolled steel, black powder coat |
| Operating temperature | -10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Outlet count, cord length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
Because a North American rack is rarely uniform. Switches, KVMs, PDUs and small appliances ship with NEMA 5-15 plugs, while servers and storage ship with C13 or C20 cords. One mixed strip removes the need for a second strip and for adapter cords, which are the usual cause of a loose connection at the wrong moment.
No. 63 A is the inlet and main breaker rating for the whole strip. Individual outlets stay at their own limits: 15 A for NEMA 5-15, 10 A for C13 and 16 A for C19.
Remote reboot. When a KVM or console server locks up, a network engineer can cycle just that outlet instead of asking someone on site to unplug it. The servers behind the KVM keep running and their metering record stays continuous.
They share the strip's 63 A main breaker but are metered as separate outlet groups, so current thresholds can be set for each bank. That matters when the NEMA bank carries small loads and the IEC bank carries the real draw.
The body section is 1.5U (45 mm) deep from the rail and 60 mm wide, so it sits inside the rear channel without eating into the cable tray. Cable entry is from the top or bottom of the strip.
Yes. The split between NEMA 5-15, C13 and C19 is built to drawing, as are cord length and plug type. Drawings within 30 minutes, quotation within one hour.
