Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Vertical (0U) |
| Height | 1.5U body section (45 mm) |
| Mounting length | 1358 mm |
| Outlet configuration | 16× GB three-pin |
| Outlet rating | 10 A per outlet (16 A version to order) |
| Input connection | Hard-wired terminal block, 5-wire |
| Input voltage | 220–250 V AC, 50/60 Hz |
| Max input current | 63 A |
| Rated power | Up to 15 kW at 250 V |
| Phase | Single-phase |
| Main breaker | Miniature circuit breaker, 1-pole 63 A |
| Surge protection | None |
| Metering | LCD, current / voltage / power / energy |
| Monitoring interface | TCP/IP, SNMP v1/v2/v3, Modbus TCP, RS485 |
| Outlet switching | Per-outlet remote on/off and metering |
| Cable entry | Top or bottom |
| Housing | Cold-rolled steel, black powder coat |
| Operating temperature | 10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Outlet count, cord length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
The miniature circuit breaker trips thermally on overload and magnetically on short circuit, which is the familiar behaviour of a DIN rail breaker. A hydraulic-magnetic breaker reacts to current alone, so its trip point does not drift with ambient temperature. For a room-temperature data room the miniature circuit breaker is the simpler and cheaper choice; for hot cabinets or wide temperature swings the hydraulic-magnetic version is steadier.
Yes. Each of the sixteen outlets has its own relay. Selecting one outlet in the web interface or over SNMP cycles only that device, and the other fifteen keep running.
The miniature circuit breaker is calibrated at 30 °C reference and its thermal element shifts with ambient. Inside that window the trip point stays within its declared tolerance, which is what most domestic data rooms and offices see.
No. GB 2099.1 three-pin is a specific pattern. If a cabinet mixes GB equipment with imported gear, order a mixed strip with IEC C13 positions rather than using plug adapters, which add a contact point and a fire risk in a rack.
Per-outlet current and energy are shown in the web interface and published over SNMP and Modbus TCP. The front LCD shows the total, which is enough for a quick walk-by check.
Yes. Outlet count, GB or IEC positions, breaker rating, cord length and plug type are all built to drawing. Drawings within 30 minutes, quotation within one hour.
