Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Horizontal |
| Height | 1U (44 mm) |
| Outlet configuration | 18× German Schuko (Type F) |
| Outlet rating | Schuko: 16 A |
| Input connection | Hard-wired terminal block |
| Input voltage | 220–250 V AC, 50/60 Hz |
| Max input current | 16 A (32 A version to order) |
| Rated power | 3.5 kW at 16 A; 7.0 kW at 32 A |
| Phase | Single-phase |
| Main breaker | Hydraulic magnetic breaker |
| Surge protection | 3-lamp SPD |
| Metering | LCD, total current / voltage / power / energy |
| Monitoring interface | RS485 Modbus-RTU |
| Outlet switching | None |
| Housing | Aluminium alloy, black anodised |
| Operating temperature | 10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Outlet count, cord length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
Because the equipment has Schuko cords and no IEC inlet: lab instruments, older switches, workstation power supplies, test benches. A C13 strip would need an adapter on every cord, which is both a fire risk and a warranty issue.
No. Schuko is used in Germany, Austria, the Netherlands, Sweden and others, but France and Belgium use Type E, and the UK uses Type G. Confirm the plug on the actual equipment before ordering a full strip of Type F.
Yes, the two-pin Europlug used on small adapters fits, but it provides no earth connection. Equipment that relies on earthing must use the full Schuko plug.
The outlet is rated 16 A, but total load is limited by the inlet: 3.5 kW at 16 A or 7.0 kW at 32 A. With 18 outlets loaded at once, the inlet limit is reached long before any single outlet.
Schuko plugs fit either way round, so the strip cannot assume line and neutral positions. The earth contact is side-mounted and always engages, which is why the SPD monitors phase, neutral and earth separately.
Yes. Outlet count, spacing, cord length and plug type are built to drawing. Send the rack height and the equipment list, and we return a drawing within 30 minutes and a quotation within the hour.
