Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Vertical (0U) |
| Height | 1.5U body section (45 mm) |
| Mounting length | 1358 mm |
| Outlet configuration | 20× IEC C13 / C19 |
| Outlet rating | C13: 10 A; C19: 16 A |
| Input connection | 2 m cord with 32 A industrial plug |
| Input voltage | 220–250 V AC, 50/60 Hz |
| Max input current | 32 A |
| Rated power | 8 kW at 250 V |
| Phase | Single-phase |
| Main breaker | 1-pole hydraulic-magnetic breaker, 32 A |
| Surge protection | None |
| Metering | LCD, current / voltage / power / energy |
| Monitoring interface | TCP/IP, SNMP v1/v2/v3, Modbus TCP, RS485 |
| Outlet switching | Per-outlet remote on/off and metering |
| Cable entry | Top with strain relief |
| Housing | Cold-rolled steel, black powder coat |
| Operating temperature | -10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Outlet count, cord length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
Speed of change. A corded strip plugs into a 32 A industrial outlet, so it can be replaced during a maintenance window without an electrician and without isolating a panel. Hard-wired strips are cheaper per unit but cost more every time the rack layout changes.
Add up the nameplate current of what you intend to plug in and stay under 32 A, not 20 times 10 A. The strip reports total current and per-outlet current, and you can set a threshold that raises an alarm before the breaker trips.
Yes. Each outlet has its own relay, controlled from the web interface, SNMP or Modbus TCP. Group commands are also available when an enclosure has to come down as a unit.
Outlet count and feed. This one has twenty positions on a 32 A cord; the sixteen-outlet version uses a hard-wired five-wire terminal block on a 63 A feed. Choose by how many devices the rack holds and whether the feed arrives as a socket or a fixed terminal.
Yes. The last state of each outlet is retained, so the rack returns to the previous pattern when power comes back, then follows the sequential start order if that function is enabled.
Yes. Outlet count, C13 and C19 ratio, cord length and plug type are built to drawing. Drawings within 30 minutes, quotation within one hour.
