Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Vertical (0U) |
| Height | 1.5U body section (66 mm) |
| Outlet configuration | 24× IEC C13 / C19 lockable |
| Outlet rating | C13: 10 A; C19: 16 A |
| Input connection | Hard-wired terminal block, 5-wire |
| Input voltage | 380–415 V AC three-phase, 50/60 Hz |
| Max input current | 32 A per phase |
| Rated power | Up to 23 kW at 415 V, 32 A |
| Phase | Three-phase |
| Main breaker | 3-pole breaker |
| Surge protection | 3-lamp SPD |
| Metering | LCD, total current / voltage / power / energy |
| Monitoring interface | RS485 Modbus-RTU |
| Outlet switching | None |
| Housing | Aluminium alloy, black anodised |
| Operating temperature | 10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Socket mix, cable length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
One inlet, one breaker, one IP or RS485 address. A three-phase strip spreads the same 24 outlets across L1, L2 and L3 inside one housing, which removes two cable drops and two points of failure from the cabinet.
Outlets are grouped by phase in eighths, so servers are patched to keep the three groups within about 10% of each other. Check the per-phase current on the LCD after commissioning; a badly balanced cabinet trips the neutral first.
At 415 V and 32 A per phase it is roughly 23 kW of usable capacity, which covers a fully populated compute cabinet. The figure assumes all three phases loaded evenly; with one phase idle, usable capacity falls by a third.
Yes. Current and power limits can be assigned per outlet group, so the group feeding a blade chassis alarms on its own rather than waiting for the whole strip to reach its limit.
Yes, it is a 5-wire connection: L1, L2, L3, N and PE. Outlets are single-phase, line to neutral, so the neutral carries the imbalance and must be sized for the full phase current.
Seven to fifteen working days after drawing approval. Send the split, cord length and plug type, and we return a drawing within 30 minutes and a quotation within the hour.
