Tel: +86-574-63783045 · ricky@idcpdu.com
| Rack standard | 19-inch EIA-310 |
| Installation | Vertical (0U) |
| Height | 1.5U body section (45 mm) |
| Mounting length | 1358 mm |
| Outlet configuration | 26× IEC C13 / C19 |
| Outlet rating | C13: 10 A; C19: 16 A |
| Input connection | Hard-wired terminal block, 5-wire |
| Input voltage | 110–250 V AC, 50/60 Hz |
| Max input current | 16 A (32 A version to order) |
| Rated power | 3.5 kW at 16 A; 7.0 kW at 32 A |
| Phase | Single-phase |
| Main breaker | 2× 1-pole hydraulic-magnetic breaker, 32 A |
| Surge protection | None |
| Metering | LCD, current / voltage / power / energy |
| Monitoring interface | TCP/IP, SNMP v1/v2/v3, Modbus TCP, RS485 |
| Outlet switching | Per-outlet remote on/off and metering |
| Cable entry | Top or bottom |
| Housing | Cold-rolled steel, black powder coat |
| Operating temperature | -10–45 °C |
| Relative humidity | 0–90% RH, non-condensing |
| Included accessories | M6×16 screws, user manual |
| Certification | CE / EMC / RoHS; built under ISO 9001 |
| Customisation | Outlet count, cord length and plug type to drawing |
| Lead time | 7–15 working days after drawing approval |
Datasheet, manual and drawings for this product (PDF).
Our engineers reply within 24 hours on business days.
Tel: +86-574-63783045
Email: ricky@idcpdu.com
Tell us your requirements — our sales team will get back to you with a quotation.
No, because the application is many small loads, not a few big ones. Switches, media converters, encoders and 1U appliances draw fractions of an amp each, so the strip is dense in outlets and light in current. If your rack holds servers at 2 A to 4 A each, order the 32 A version or a 63 A model.
Every outlet state change, threshold breach and user login is timestamped. When a device reboots overnight, the log shows whether the outlet was switched, whether a current threshold was crossed, or whether nothing happened at all — which is often the fastest way to rule out the PDU and look at the device.
Yes. Groups are defined in the web interface, and one command switches the whole group. On a 26-outlet strip that is useful for bringing a bench of test equipment up in one action instead of twenty-six.
The busbar is rated for the strip's total current and each outlet keeps its own rating. What changes is diversity: the more outlets, the lower the chance that all of them draw their maximum at once, which is why a 16 A feed is realistic for this pattern.
Two brackets fix it to the rear 19-inch rails at 1358 mm centres, and the 1.5U section sits inside the rear channel. Cable entry is available at the top or bottom, so the feed can come from a floor box or an overhead tray.
Yes. Outlet count, C13 and C19 ratio, cord length and plug type are built to drawing. Drawings within 30 minutes, quotation within one hour.
