Basic PDU

6-Outlet US NEMA 5-15R Horizontal Rack PDU, 110–240 V 15 A, 1U

Quick Answer6-Outlet US NEMA ⁦5-15⁩R Horizontal Rack PDU, ⁦110–240⁩ V 15 A, 1U — an IDCPDU Basic PDU for data-centre and equipment-room racks.

Local socket pattern, not an adapter job — Outlets are the pattern already installed in the building, so equipment cords go straight in — one joint less to loosen inside a live rack.
⁦110–250⁩ V wide input — One build covers 120 V and 230 V sites and rides out a brownout instead of dropping the load.
Hard-wired terminal block — There is no inlet plug to work loose or heat up — the feed lands on terminals sized for the strip's full current.
Master switch on the body — Field maintenance starts with one visible break, which is exactly what a lockout/tagout procedure asks for.
Anodised aluminium body — Lighter than a steel shell and it sheds heat instead of trapping it; there is no paint layer to chip during installation.
Passive build, nothing to fail — No metering board and no switching relay inside — for a basic strip that means fewer parts that can take a rack down.

Tel: +86-574-63783045 · ricky@idcpdu.com

6× NEMA ⁦5-15⁩R outlets, 1U horizontal
⁦110–240⁩ V, 15 A, aluminium body
Master switch and rear cable entry left or right
A 369 mm horizontal strip for wall-mount cabinets, half-racks and network enclosures where a vertical strip does not fit; the aluminium extrusion weighs about half a steel equivalent.
Cable entry can be ordered left or right, so the strip sits beside the patch panel without a service loop crossing the rack.
Used in small offices, CCTV racks, retail back rooms and branch wiring closets on US and Latin American 120 V supplies.
Outlet count, cord length and plug type are built to drawing: layout within 30 minutes, quotation within 1 hour.

Frequently Asked Questions

Will a 15 A strip trip on a 20 A circuit?

No — the strip passes up to 15 A and the 20 A branch breaker protects the circuit. Keep total appliance load under 15 A to stay within the strip rating.

Can it be mounted vertically instead?

The 1U body is designed for horizontal mounting; a vertical strip is the better fit for full-height cabinets.

Does the master switch cut all six outlets?

Yes, one rocker isolates all outlets for service without unplugging cords.

Is 240 V supported?

Yes, the strip accepts ⁦110–240⁩ V, so it also works on ⁦220–240⁩ V supplies in Latin America and Asia with the right plug.

Can I order it with a specific cord length?

Yes — 1.5 m, 2 m and 3 m are standard options, and other lengths are made to drawing.

What is the delivery time?

Drawing within 30 minutes, quotation within 1 hour, production ⁦7–15⁩ working days.

Rack standard	19-inch rack, 1U
Installation	Horizontal
Mounting length	369 mm
Body dimensions (W×H)	45 × 45 mm
Outlet configuration	6× US NEMA ⁦5-15⁩R
Outlet rating	15 A
Max input current	15 A
Input voltage	⁦110–240⁩ V AC, 50/60 Hz
Phase	Single-phase
Input connection	Hard-wired terminal block
Main breaker	No
Master switch	Yes
Housing	Aluminium alloy, black anodised
Operating temperature	⁦10–45⁩ °C
Relative humidity	⁦0–90⁩% RH, non-condensing
Included accessories	M6×16 screws, user manual
Certification	CE / EMC; built under ISO 9001

6-Outlet US NEMA 5-15R Horizontal Rack PDU, 110–240 V 15 A, 1U

Product Description

Product Specifications

Product documents

Support & Contact

Feedback

Frequently Asked Questions

Related Products

14-Outlet Swiss SEV 1011 Vertical Rack PDU, 220 V, 10 A per Outlet, 0U

16-Outlet GB Socket Vertical Rack PDU, 220–250 V 63 A, Main and Branch Breakers, 0U

18-Outlet South African Socket Vertical Rack PDU, 250 V 63 A, Hydraulic Breaker and SPD, 0U

19-Outlet British BS 1363 Vertical Rack PDU, 230 V 63 A, Hydraulic Breaker, 0U