DC distribution panel

9U Horizontal Breaker Rack PDU, 19-inch, 110–250 V, Grey

Quick Answer9U Horizontal Breaker Rack PDU, 19-inch, ⁦110–250⁩ V, Grey — an IDCPDU DC distribution panel for data-centre and equipment-room racks.

⁦110–250⁩ V wide input — One build covers 120 V and 230 V sites and rides out a brownout instead of dropping the load.
Breaker ahead of the outlets — A fault trips inside the strip, not at the upstream panel — the rest of the row keeps serving traffic.
Hard-wired terminal block — There is no inlet plug to work loose or heat up — the feed lands on terminals sized for the strip's full current.
Runs below zero — Tested from sub-zero ambient upward, so cold shelters and unheated halls are inside the envelope, not outside it.

Tel: +86-574-63783045 · ricky@idcpdu.com

9U horizontal chassis, 531 mm body
Breaker integrated, copper bar input
High outlet count in a shallow depth
Nine rack units of vertical space let the chassis carry a large socket field without a long vertical strip; the 111.59 × 531 mm body still leaves the rear cable path usable.
Because the outlets face the rear, patch cords drop into a horizontal manager instead of crossing the cabinet, which keeps airflow lanes clear in a 47U rack.
Used for tall cabinets, laboratory racks and OEM builds that need many national sockets in one horizontal unit.
Outlet list and cable length are built to drawing: layout within 30 minutes, quotation within 1 hour.

Frequently Asked Questions

Why 9U instead of a vertical strip?

A horizontal 9U unit keeps the side rails free for cable managers and gives a wider socket field per row, which suits lab racks and OEM panels.

How many sockets fit in the 9U chassis?

Typically ⁦24–36⁩ national sockets or ⁦30–40⁩ C13 modules depending on module width; we confirm the exact count in the layout drawing.

Does it block airflow in the rack?

The body is 111.59 mm wide and sits at the rear; cords drop into a horizontal manager so the front airflow path stays clear.

Is the 9U version available in black?

Yes, any RAL colour can be ordered; grey and black are stock finishes.

Can metering be added?

A metering module can replace one socket position; tell us at order stage.

What is the lead time?

Layout within 30 minutes, quotation within 1 hour, production ⁦7–15⁩ working days after approval.

Rack standard	19-inch rack, 9U
Installation	Horizontal
Mounting length	465 mm
Body dimensions (W×H)	111.59 × 531 mm
Input voltage	⁦110–250⁩ V AC, 50/60 Hz
Phase	Single-phase
Input connection	Hard-wired terminal block
Main breaker	Yes
Master switch	No
Housing	Cold-rolled steel, grey powder coat
Operating temperature	-⁦10–45⁩ °C
Relative humidity	⁦0–90⁩% RH, non-condensing
Included accessories	M6×16 screws
Certification	CE / EMC; built under ISO 9001

9U Horizontal Breaker Rack PDU, 19-inch, 110–250 V, Grey

Product Description

Product Specifications

Product documents

Support & Contact

Feedback

Frequently Asked Questions

Related Products

3U Horizontal Breaker Rack PDU, 19-inch, 110–250 V, Grey

Horizontal Breaker Rack PDU, 19-inch, 110–250 V, Black